Merlin 2.0 Garage Remote Control for C945 CM842 C940 C943 E945 Replacement
Merlin 2.0 Garage Remote Control for C945 CM842 C940 C943 E945 Replacement
Features:
Brand NEW Replacement for C945 CM842 C940 C943 E945 Bear Claw Plus Garage Remote Control
Suits remote models: Merlin
LED Indicator
Long Range
Compact Pocket Size
Manual Instructions Included
Controls Up To 3 Garage Doors Only
Button Slide Protector
Battery: 27A12V
Compatibility:
CB22 (Control Board)
HE60 (HomEntry)
MGA600 XLR8 (Wingmate 3)
MGL300 (Linear Swing Gate)
MGL400 (Linear Swing Gate)
MGS300 (Sliding Gate Motor)
MGS500 (Sliding Gate Motor)
MGS500T (Sliding Gate Motor)
MGS1000 (Sliding Gate Motor)
MGS1000T (Sliding Gate Motor)
MJ3800 (Garage Opener)
MJ3800R (Garage Opener)
ML500 (MotorLift)
ML700 (MotorLift)
MLR500 (Chamberlain Garage Opener)
MLR750 (Chamberlain Garage Opener)
MLR850 (Chamberlain Garage Opener)
MR60 (Rolling Garage Opener)
MR600 (Roller Door Opener)
MR600A (Roller Door Opener)
MR650 (Roller Door Opener)
MR800 (Roller Door Opener)
MR800A (Roller Door Opener)
MR850 (Roller Door Opener)
MR1000 (Roller Door Opener)
MT60 (Sectional & Tilt Garage Opener)
MT60P (Sectional & Tilt Garage Opener)
MT230 (Sectional & Tilt Garage Opener)
MT600 (Sectional & Tilt Garage Opener)
MT800 (Sectional & Tilt Garage Opener)
MT1000 (Sectional & Tilt Garage Opener)
MT3850 (Whisper Drive)
MT5580 (Sectional & Tilt Garage Opener)
MT5580P (Sectional & Tilt Garage Opener)
MR850 (Roller Door Opener)
MR1000 (Roller Door Opener)
The remote you will receive is the black and chrome remote pictured at the bottom of the listing (style may vary depending on availability)
1. On your garage door opener, the "Learn" or "Program" button is typically located on the back of the motor unit or on the wall-mounted control panel.
2. Press and hold the "Learn" or "Program" button until the indicator light on the motor unit turns off.
3. Within 30 seconds of clearing the codes, press and release the desired button on the replacement remote that you want to program (e.g., Button 1, Button 2, etc.).
4. Hold down the button you just pressed on the remote while aiming it at the garage door opener. Press and release the "Learn" or "Program" button on the opener unit. The indicator light on the opener should blink or turn on, indicating that it is ready to receive the code.
5. Release the button on the remote once the indicator light on the opener blinks or turns off.
Package Includes: :
1 x Merlin 2.0 Garage Remote Control for C945 CM842 C940 C943 Replacement
1 x Key chain
WARNING: Keep button batteries out of children’s reach:
• Keep coin-sized button batteries and devices out of sight and out of reach.
• Examine devices and make sure the battery compartment is secure.
• Dispose of used button batteries immediately. Flat batteries can still be dangerous.
• If you suspect a child has swallowed a button battery, immediately go to a hospital emergency room. Do not let the child eat or drink and do not induce vomiting.
• Call the Poisons Information Centre on Australia 13 11 26 or New Zealand 0800 764 766 for additional treatment information.
• Tell others about the risk associated with button batteries and how to keep their children safe.
Operation method :
1. Clear the copy remote controller, Long press the above two keys at the same time and release your hand when the light flash quickly.
2. Press the button of the copied remote control with one hand and press the button of the new remote control with the other hand, keep for a few seconds, release when the new remote-control lights flash quickly, then the copy succeeds.
3. If all the above operation succeeds, the remote control can be used directly. If it cannot work, please operate again from Clearing.
4. If you meet misoperation and cancel useful codes, before re-copy, you can press the below two keys at the same time for 2 seconds and release when the lights flash quickly, then the control will be recovered.
Merlin 2.0 Garage Remote Control for C945 CM842 C940 C943 Replacement
